Brass Wire Mesh, Copper +Zinc, H65, H70, H80 Copper Content

Tejido supplies brass mesh and phosphor bronze wire cloth. Brass wire mesh offers greater strength than copper mesh and phosphor bronze.

Brass wire mesh:
Roll length: 30 m
Roll width: 0.6 m
Material: H65
Mesh: 200x200 mesh

80mesh*0.14 Brass Wire Mesh Cloth

Square Hole Brass Woven MeshBrass Wire Filter Cloth

Wire Material:
Brass Wire: High brass (65-70% copper, 25-30% zinc) wire and low brass (80% copper, 20% zinc) wire have much better abrasion resistance, better corrosion resistance and lower electrical conductivity when compared to copper wire.

Phosphor Bronze Wire: This copper-tin (4% to 9% tin, approximately 0.25% phosphorous with the balance copper) alloy wire is corrosion, wear and tear resistant was frequently used in the past for fine mesh cloth.

Features:
Brass wire cloth is excellent for marine and out of door applications because of its immunity to rust and salt solutions. Brass wire mesh and cloth is an ideal mesh for fabricating gasoline filters and baskets for electropolishing.

Brass mesh H60 H80

mesh wire diameter (mm) aperture(mm)
2 1.6 11.10
4 0.91 5.44
6 0.71 3.52
8 0.50 2.67
10 0.50 2.04
12 0.45 1.66
14 0.40 1.41
16 0.30 1.28
18 0.25 1.16
20 0.25 1.02
30 0.21 0.64
40 0.19 0.45
50 0.15 0.36
60 0.15 0.27
70 0.13 0.232
80 0.12 0.197
90 0.11 0.172
100 0.10 0.154
110 0.09 0.141
120 0.09 0.122
130 0.07 0.125
140 0.07 0.111
150 0.06 0.109
160 0.06 0.098
180 0.053 0.088
200 0.053 0.074
220 0.05 0.065
(Roll width):0.60m-1.8m