We can produce high tensile woven mesh with an excellence quality, flat and square aperture. We offer 2 types of wire diameter that is 0.8mm (Stainless Steel 316 Grade) and 0.9mm (Stainless Steel 304 Grade). The mesh opening for 0.8mm diameter( weft and warp is 10.5 / 11) and the thickness of the mesh is 1.4mm to 1.5mm. The mesh opening for 0.9mm diameter (weft and warp is 9.5/10) and the thickness of the mesh is 1.6mm to 1.7mm. The tensile for 0.8mm is about 850Mpa or more. The mesh should be supply by sheet and should be black powder coated.
Woven wire cloth with the following properties:
Stainless steel fibers of diameter around 0.1 mm or smaller;
Dense weave;
Robust (very strong), e.g., does not wear out if walked on;
Waterproof (if it is not, then it is possible to make it waterproof, e.g., apply a backing material that makes it waterproof );
Available in large quantities with very wide rolls (several metres)
Stainless steel wire mesh refers to the woven wire fabric made by weaving looms from first class stainless steel material in SUS/AISI 201, 202, 302, 304, 310, 310S, 316, 316L, etc. This page provides information on wire materials applied for weaving, properties, and specification of most popular specifications.
Major Wire Materials and Introduction: Stainless steel AISI 304, 304 L, 316 and 316 L
AISI 304: This type is the basic stainless alloy mostly commonly used for wire cloth/mesh weaving. It offers excellent property against rusting and oxidation.
AISI 304 L: Materials similar to 304, with reduced carbon content for better weaving.
Wire mesh stainless steel according to ASTM A240 or f SS-304 for wall insulation support,
Mesh opening dimension 50x50 mm x 1mm Dia Twisted but un-welded
We offer material test certificate & certificate of origin.
Precision woven stainless steel wire mesh
| Description | Raw Material | Aperture Size μm |
Wire Diameter μm |
Mesh per Inch |
Open Area |
Thickness μm |
| Precision woven stainless steel wire mesh |
DIN 1.4301/AISI 304 | 40 | 25 | 400 | 38% | 50 +/- 2 |
| Precision woven stainless steel wire mesh |
DIN 1.4301/AISI 304 | 42 | 36 | 325K | 29% | 76 +/- 2 |
| Precision woven stainless steel wire mesh |
DIN 1.4301/AISI 304 | 63 | 40 | 250 | 37% | 90 +/- 2 |
| Precision woven stainless steel wire mesh |
DIN 1.4301/AISI 304 | 90 | 40 | 200 | 48% | 90 +/- 3 |
Woven Wire Mesh.
Mesh: 8.63
Wire Diameter: 0.60 mm.
Mesh Opening: 2.34 mm.
Material: Stainless steel grade 316 with plain weave.
Size: 2300 mm x 3000 mm.
Mesh: 3.56
Wire Diameter: 1.50 mm
Mesh Opening: 5.63 mm
Material: Stainless steel grade 316 with plain weave
Size: 2300 mm x 3000 mm
Wire Diameter: 1.00 mm.
Mesh Opening: 1.94 mm.
Material: stainless steel grade 316 with plain weave.
Size: 2400 mm diameter. (Round Single Piece Without Joints)
Wire Diameter: 1.00 mm.
Mesh Opening: 6.13 mm.
Material: stainless steel grade 316 with plain weave.
Size: 2400 mm diameter. (Round Single Piece Without Joints)
AISI 316: Stainless stabilized by the addition of 2% molydbenum. It has better resistance to pitting corrosion than the other chromium-nickel stainless steels and high strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to AISI304.
Wire cloth woven of T-316 has extensive use in chemical processing when better corrosion resistance is required than the regular chromium-nickel types.
AISI 316 L: Very similar to AISI316, yet with the reduced carbon content for better wire cloth weaving.
We working with many different clients to supply high quality, low cost stainless steel wire mesh disc filter screen products throughout Asia.
Material: Wire cloth - stainless steel screen - 18.7 / 18.5
304 woven 200 x 200 0.0021
Mesh Opening = 74µm +/- 5µm
Wire Diameter = 54µm
Open Area = 33.5%
Thickness - 85µm
Woven Wire Mesh: 6 openings per inch x 16
Gauge Material SS316L
(Diameter 1.625 mm)
Wire Dimension:7 x 7 ft
Woven Mesh :1' - 4" width x 2' - 3 1/2" id, 6 openings per inch,
Material SS 316l (diameter 1.625 mm)
Wire Dimension : 7 x 7 ft
Lined with 40 Mesh x .010" Woven Wire .015" Openings, No Handle, Stainless Steel
74” L x 20” W x 1.5” H
12” L x 20” W x 1.5” H
Welded wire mesh as the infill portion of a guardrail system supported by a stainless steel frame. It is possible to get square openings at 3 ½” X3 ½” in a panel that is height of 4’-4” with a typical width of 3’-8 ½”. 440 linear feet or about 118 panels. Attached a sketch.
Stainless Steel Wire Mesh. 12 x 12 mesh plain woven using 316 gauge quality stainless steel. it is woven with a wire of thickness 0.50mm.the product must be finished in Black, be coated with a UV Protective Coating and pass the Australian Rigidity standard AS5039-2003. weave to this sheet width size of 1500 mm x 2400 mm
Stainless Steel Mesh Perforated pass the Australian Rigidity Standard AS5039-2003
SS woven wire mesh screen. 6x6 mesh .080 wire diameter 48''x108''.
6000mm (L) x 1220mm (W) of woven mesh in grade 410 stainless steel.
Stainless steel woven wire mesh plain weave, 4 mm aperture.
Standard roll of #30 (600 micro meter) stainless steel plain woven mesh.
Woven wire mesh made out of stainless steel type 304. the specs: 10, 18, 35 mesh with dimentions of 12 inch X12 inch, and a wire sizes of .035.
Woven stainless steel mesh
Aperture 11.0mm
Wire dia. 3.15mm
Open area 60.4%
Panel size is 3600mm (long) x 1200mm (wide). Wire mesh will be used as an external cladding.
Stainless steel wire mesh with its excellent resistance against acid, alkali, heat and corrosion, extensively used in processing of oil, chemical, food, making wire mesh filter, also sorting and screening of solid, liquid and gas in mine, metallurgy, airspace and machine making etc.
Technical Information of Stainless Steel Wire Mesh:
1) Roll size: usually, manufactured in 30m ( up to 200m) long and in width of 36’ 48’ 1m 1.2m 1.5m 2.0m etc. or cut to length panels as per client’s requirement.
2) Packing: water-proof paper, woven bag and also can be made as per client’s requirement.
3) Weave: Plain Weave, Twill Weave ; Plain Dutch Weave, Dutch Twill Weave.
4) Mesh counts: 1 mesh to 635 mesh.
5) Sample: available
Mesh/Inch |
Wire Diameter |
Aperture |
Open Area |
Weight(LB) /100 Square Foot |
||
Inch |
MM |
Inch |
MM |
|||
1x1 |
.080 |
2.03 |
.920 |
23.37 |
84.6 |
41.1 |
2X2 |
.063 |
1.60 |
.437 |
11.10 |
76.4 |
51.2 |
3X3 |
.054 |
1.37 |
.279 |
7.09 |
70.1 |
56.7 |
4X4 |
.063 |
1.60 |
.187 |
4.75 |
56.0 |
104.8 |
4X4 |
.047 |
1.19 |
.203 |
5.16 |
65.9 |
57.6 |
5X5 |
.041 |
1.04 |
.159 |
4.04 |
63.2 |
54.9 |
6X6 |
.035 |
.89 |
.132 |
3.35 |
62.7 |
48.1 |
8X8 |
.028 |
.71 |
.097 |
2.46 |
60.2 |
41.1 |
10X10 |
.025 |
.64 |
.075 |
1.91 |
56.3 |
41.2 |
10X10 |
.020 |
.51 |
.080 |
2.03 |
64.0 |
26.1 |
12X12 |
.023 |
.584 |
.060 |
1.52 |
51.8 |
42.2 |
12X12 |
.020 |
.508 |
.063 |
1.60 |
57.2 |
31.6 |
14X14 |
.023 |
.584 |
.048 |
1.22 |
45.2 |
49.8 |
14X14 |
.020 |
.508 |
.051 |
1.30 |
51.0 |
37.2 |
16X16 |
.018 |
.457 |
.0445 |
1.13 |
50.7 |
34.5 |
18X18 |
.017 |
.432 |
.0386 |
.98 |
48.3 |
34.8 |
20X20 |
.020 |
.508 |
.0300 |
.76 |
36.0 |
55.2 |
20X20 |
.016 |
.406 |
.0340 |
.86 |
46.2 |
34.4 |
24X24 |
.014 |
.356 |
.0277 |
.70 |
44.2 |
31.8 |
30X30 |
.013 |
.330 |
.0203 |
.52 |
37.1 |
34.8 |
30X30 |
.012 |
.305 |
.0213 |
.54 |
40.8 |
29.4 |
30X30 |
.009 |
.229 |
.0243 |
.62 |
53.1 |
16.1 |
35X35 |
.011 |
.279 |
.0176 |
.45 |
37.9 |
29.0 |
40X40 |
.010 |
.254 |
.0150 |
.38 |
36.0 |
27.6 |
50X50 |
.009 |
.229 |
.0110 |
.28 |
30.3 |
28.4 |
50X50 |
.008 |
.203 |
.0120 |
.31 |
36.0 |
22.1 |
60X60 |
.0075 |
.191 |
.0092 |
.23 |
30.5 |
23.7 |
60X60 |
.007 |
.178 |
.0097 |
.25 |
33.9 |
20.4 |
70X70 |
.0065 |
.165 |
.0078 |
.20 |
29.8 |
20.8 |
80X80 |
.0065 |
.165 |
.0060 |
.15 |
23.0 |
23.2 |
80X80 |
.0055 |
.140 |
.0070 |
.18 |
31.4 |
16.9 |
90X90 |
.005 |
.127 |
.0061 |
.16 |
30.1 |
15.8 |
100X100 |
.0045 |
.114 |
.0055 |
.14 |
30.3 |
14.2 |
100X100 |
.004 |
.102 |
.0060 |
.15 |
36.0 |
11.0 |
100X100 |
.0035 |
.089 |
.0065 |
.17 |
42.3 |
8.3 |
110X110 |
.0040 |
.1016 |
.0051 |
.1295 |
30.7 |
12.4 |
120X120 |
.0037 |
.0940 |
.0064 |
.1168 |
30.7 |
11.6 |
150X150 |
.0026 |
.0660 |
.0041 |
.1041 |
37.4 |
7.1 |
160X160 |
.0025 |
.0635 |
.0038 |
.0965 |
36.4 |
5.94 |
180X180 |
.0023 |
.0584 |
.0033 |
.0838 |
34.7 |
6.7 |
200X200 |
.0021 |
.0533 |
.0029 |
.0737 |
33.6 |
6.2 |
250X250 |
.0016 |
.0406 |
.0024 |
.0610 |
36.0 |
4.4 |
270X270 |
.0016 |
.0406 |
.0021 |
.0533 |
32.2 |
4.7 |
300X300 |
.0051 |
.0381 |
.0018 |
.0457 |
29.7 |
3.04 |
325X325 |
.0014 |
.0356 |
.0017 |
.0432 |
30.0 |
4.40 |
400X400 |
.0010 |
.0254 |
.0015 |
.370 |
36.0 |
3.3 |
500X500 |
.0010 |
.0254 |
.0010 |
.0254 |
25.0 |
3.8 |
635X635 |
.0008 |
.0203 |
.0008 |
.0203 |
25.0 |
2.63 |
If you have any more questions please email or call me.